Stamping is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape.

Stamping Parts Advantages：

Since press processing is often performed at room temperature, it is also called cold stamping. Stamping forming is one of the metal pressure processing methods. It is a material forming engineering technology based on the metal plastic deformation theory. The raw materials for stamping processing are generally sheet or strip, so it is also called sheet metal stamping.

(1) The dimensional accuracy of the stamping parts is guaranteed by the mold, and has the same characteristics, so the quality is stable and the interchangeability is good.

(2) Since it is processed by a mold, it is possible to obtain a part that is thin or light, has good rigidity, high surface quality, and complicated shape, which is impossible or difficult to manufacture by other processing methods.

(3) Stamping processing generally does not require heating of the blank, nor does it cut a large amount of metal like cutting, so it not only saves energy, but also saves metal.

(4) For ordinary presses, dozens of pieces per minute can be produced, and high-speed presses can produce hundreds of thousands of pieces per minute. So it is a highly efficient processing method.

Material: Aluminum, Brass, Stainless Steel, Copper, Galvanized plate ,etc.

Finish: Anodizing, Powder coating, Sand blasting, Polishing, Zinc plating and Chrome plating, etc.

Machinery  Tonnage: 10T~125T

Tolerances: ±0.1mm~±0.01mm

Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process.

Die Casting Parts Advantages：

1. High production efficiency, easy to realize mechanization and automation in the production process
2. The die casting has high dimensional accuracy and surface quality.
3. High mechanical properties of the die casting.
4. Can die-cast complex thin-walled parts.

Material: Aluminum, Brass, Copper, Zinc ,etc.

Finish: Anodizing, Powder coating, Sand blasting, Polishing, Zinc plating and Chrome plating, etc.

Machinery  Tonnage: 12T~280T

Tolerances: ±0.1mm~±0.01mm

Extrusion is a process used to create objects of a fixed cross-sectional profile. A material is pushed through a die of the desired cross-section.

Extrusion Parts Advantages：

1. High production efficiency, easy to realize mechanization and automation in the production process
2. It can extrude parts with various complicated shapes, deep holes, thin walls and opposite-sex interfaces
3. Extruded parts have excellent precision

Material: Aluminum, Brass, Copper, Stainless Steel, Zinc ,etc.

Finish: Anodizing, Powder coating, Sand blasting, Polishing, Zinc plating and Nickel plating, etc.

Machinery  Tonnage: 500T~1250T

Tolerances: ±0.1mm~±0.05mm